How to Disconnect the ABS in my 300E??
 

Helo Board,

My 300E brakes have been shuddering at low speds despite new pads, rotors, and sensors. Wel I wanted to know if there was a way in which I could disable the ABS to see if the problem still persists.
Is there a fuse or connector that I could unplug to disable the ABS?

Will the brakes still work if I disable the ABS?

Disconnecting a front ABS sensor will shut the system off.
Or you can remove a relay INSIDE the ABS hydraulic unit.

Where is the relay located in the 300e?