|
|
|
|
|
#1
12-23-2003, 10:46 AM
|
||||
|
||||
|
HAPPY HOLIDAYS TO GILLY ! & thanks.
Gilly-
When i wrote on these pages I needed an EGR valve, you explained perhaps a cleaned ERG tube would correct my problem. In 30 minutes I had the tube on my bench. $2 of carb cleaner and an assortment of wires, cable etc run thru the tube cleared the gunk and the ML320 idles smooth. Thanks for saving me $250. Merry Christmas to me and THANK YOU ! Steve Danville - amateur wrench.
__________________
Steve Danville what i did myself. CPS rear shocks MAS x 3. SparkPlugs (twice) Fuel pump & Filter Window switch replaced both failed horns with Honda horns. Cleaned ERG Tube Oil changes Oil consumption Fix Brake Pads A/C Recharge Anti-Freeze change X 2. Front Shocks. Monroe. $90 Mercedes Warrenty Work: Harmonic balancer,power steering clamp. Cat converters.Drive Shaft Bearing.s Replaced Outer Lower Tie Rods and front lower ball joints at 156,000 miles 
|
|
#2
12-23-2003, 11:23 AM
|
||||
|
||||
|
No Sweat
Happy to help out.
Hope everyone reading this has a Merry Christmas (or other Holiday of your choosing) and a great 2004! Gilly-Amateur Moderator
__________________
Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)
|
 |
| Bookmarks |
|
|
Linear Mode
