PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Re-sealling & Re-building Tranny 300E (http://www.peachparts.com/shopforum/showthread.php?t=84677)

joel 01-19-2004 08:42 PM

Re-sealling & Re-building Tranny 300E
 
the leak in my tranny has worsen. the indy tranny shop
said i have a choice whether i wanted them to just fix
the leak, which most likely are o-rings and/or gaskets,
or to take the tranny apart and replace all rubber parts.

when i said my tranny will then be re=built, the guy said
no. it will just be sealed, given the mileage of the car at 160k.

what then is the difference between rebuilding and resealing
the tranny. thanks!!

Ali Al-Chalabi 01-19-2004 10:45 PM

Rebuilding involves also renewing the friction linings in the tranny, cleaning the gears and bringing all the tolerances and clearances back within spec as well as resealing the clutch packs and internals. Also, any upgrades are usually applied to rebuilt trannies.

joel 01-20-2004 12:42 AM

thanks for the reply Ali. that sure is thin line between
them since both cure would have the tranny out.

i will see this guy tomorrow am and will post any useful
info for future reference.

joel 01-24-2004 11:28 AM

after 550 cnd dollars, my tranny leak is gone. i hope this
is not another 2 week excitement period!!


All times are GMT -4. The time now is 01:42 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website