Ok gang here's the question.

I just purchased 500E springs from vcci, these will replace my H&R's and be coupled with bilstein sports. (I was looking for a little more hieght and more cushion).

I am trying to avoid having the front end higher than the rear. This could be tricky because I'm pretty sure that most of the difference in weight between the 500E and the 300E are in the engines. I need your help in deciding which spring pads to use. Glen has suggested I use a 2 bump up front and a 3 or 4 in rear. I am hoping maybe someone out there is running this set-up now and has been through what I am about to go through.

The springs are going to be installed this week along with new front control arms.

Thanks for your help!

__________________
Brandon



2008 S550
1957 Dodge D100
1967 VW Microbus 21 Window
2001 Suburban
2004 Beach cruiser bicycle
-----------------GO DUKE!-----------------

"It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776