Two questions. 1) How do you remove the inside rear view mirror? 2) Any experience in tigthtening up the ball joint. The mirror is loose in both places. Thanks in advance!

------------------
Ted Beer
'91 190E 2.3

Ted:

Here's a brief description by mikeg3 on how to replace your rear view mirror. It should be the same for your 190E -->
"I recently replaced the rear view mirror on my 83 300SD. If your mirror is like mine, it is held in place by 2 pinswith a spring between them. It looks something like this
<ZZZZZZZ>. To remove the mirror, pull on it moving it to the side. This should compress one of the pins & the mirror should come out.
To replace the new mirror, put one of the ends with the pins in place. Press on the other side and it should pop into place. I hope this is clear enough for you."

Hope this helps.

Brian
*1986 2.3-16V
*Pearl Black AMG rims, yellow calipers
*Pearl Black grille and frame
*Euro headlights, clear blinkers
*Smoked taillights
*Zebrano wood kit
*White-faced gauges
*H&R springs/Bilstein shocks (yet to be installed)

Brian,
Thanks, your description was very clear.
Ted


------------------
Ted Beer
'91 190E 2.3