|
|
|
|
|
#1
02-18-2004, 05:40 PM
|
||||
|
||||
Doh! Screwed up- literally. Need kind words of reassurance!
tried changing my rear sway bar links and bushings today, and managed to shear a bolt in half in the process. On of the bolts that holds the U-clamp with the u-shaped rubber bushing was giving me a real hard time coming loose then snapped and half is stuck in the clamp's built-in nut
 Taking it to the shop tomorrow and hopefully they can drill it out or something to fix it. Will I be ok to drive on it (gently) with just one bolt holding the clamp on? My fav shop is about 3 miles away.
__________________
1993 320TE M104 --------------------------------------------------- past: 1983 230E W123 M102 1994 E300D S124 OM606 (x2) 1967 250SE W108 M129 1972 280se 3.5 W108 M116 1980 280SE W116 M110 1980 350SE W116 M116 1992 300E W124 M103 1994 E280 W124 M104 ---------------------------------------------- "music and women I cannot but give way to, whatever my business" -Pepys Last edited by chazola; 02-18-2004 at 05:49 PM. 
|
|
#2
02-18-2004, 06:23 PM
|
||||
|
||||
|
Should not be a problem at all.
__________________
95 SL500 Smoke Silver, Parchment 64K 07 E350 4matic Station Wagon White 34K 02 E320 4Matic Silver/grey 80K 05 F150 Silver 44K
|
 |
| Bookmarks |
|
|
Linear Mode
