![]() |
99 C280 stalls after 15 minutes
I own a 99 C280 Sport with 75k on it. The car will die after about 15 minutes of running. The vechicle will re-start after another 15 minutes of sitting. When the vechicle will not re-start there is not any voltage at the fuel pump, also there is not any spark. There are not any codes at this time. I am a Chrysler tech I have known that the when the cam sensor or crank sensor fails there will not be any voltage at the pump. Reading all the posts I have seen alot about this OVP relay. Will this relay cause no spark & no voltage at the fuel pump? Also where is this relay located & is there a way to diagnose if the relay is at fault.
|
I've seen this before on a Mercedes ML320. It turned out to be the crank sensor. It would start up and run for about fifteen minutes and shut down. the fuel pump will not run when the is no signal to the ignition.
|
Stan is correct ! The newer M112/113 engines have flywheel sensor problems. That sensor is behind the drivers side cylinder head.
|
crank sensor location replacement ml320
so to replace--
you unplug wire unscrew with socket ? My ML320 wont start - thought I would try the crank sensor. |
All times are GMT -4. The time now is 11:38 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website