|
|
|
|
|
#2
05-14-2004, 09:52 PM
|
||||
|
||||
|
Recently had the same EXACT problem. You need to take off the door panel and make sure the plug to the door lock actuator is connected and pushed in all the way. Also, might as well check to see that the vacuum line is in also.
Since I had just replaced the actuator months earlier, I knew it was not bad. If plugs look good, possible bad actuator.
__________________
Willy '94 E420 White Mods ------- Berg Werks Keyless Entry Buzzer replaced with Chime Dash Light Upgrade Burlwood/Leather shift knob Alpine CDA-9815 Head Unit 2002/2003 16" C Class 7-Spoke Wheels Updated "Chip" to fix Code 19 problem 
|
| Bookmarks |
|
|
Threaded Mode
