|
To remove the radiator, you must remove the front bumper.
There are (4) 13 mm hex-nuts holding the bumper inplace. 2 at each bracket. Make sure you remove the air bag sensor that is attached to the licenec plate bracket out of the way. remove the 10 mm hex nuts-bolts at the bottom of the radiator. These nuts hold the radiator to the condensor along the bottom. Disconnect the hoses and remove. (There's a red drain plug at the lower left corner of the radiator). There maybe other bolts/nuts holding the radiator on both sides. I don't remember. However, you'll see them if any. Oh, one more thing. The long bracket that covers the top of the radiator must come out. It's easy. That's all I can remember. Good luck.
Meza
__________________
Meza
1993 190E 2.6
Advanced Diesel Systems Test and Research Engineer
|