I had to set some steel blocks to support 3 points and use a part of the ball joint press to push the ball joint. I didn't want to push in the center, only on the outside.

I can set the press to different tonnages. It is a hand pumped press. I set it to 30 tons and as I pumped it went almost to the bottom. I switched it to 20 tons to make sure I didn't use too much force and it wouldn't go. I set it back to 30 tons and it went in and seated. This job takes 30 tons.

__________________
Steve
1985 Mercedes 500SL Euro (Gray market)
1995 BMW 520i Euro (Gray market)
1992 BMW 525it Wagon
1994 Honda Del Sol Si