![]() |
Turn Signal Problems, any idea's
I own a 1999 500S. I had to replace the right front turn signal bulb and socket. Now the turn signals only work when the headlamps are off. They are also blinking too fast. When I turn on the headlamps they do not blink at all, they are bright but do not blink. The rear looks just fine.
Any suggestions on what I am doing wrong? |
What were the symptoms of the original light and socket? Why did you need to replace it?
|
Reply
I had to replace it when the turn signal lens broke. The clip holding it in broke.
I was able to fix the issue with the bulb when I gave a 1/2 turn to the bulb then put it back into the socket holder. |
1st ?, do you have clear lenses with amber bulbs or are they amber lenses with clear bulbs? I believe the bulb bases have different offsets for the pins which lock them in place.
2nd ?, is the problem isolated to one side or both? |
All times are GMT -4. The time now is 11:20 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website