I have a 1980 450SL where the speedo cable seems to stick. At low speeds (less than 25 mph)the needle bounces and at higher speeds you can hear a clicking noise. I would like to replace the cable but do not know how to get the gauge cluster out. Any suggestions? Do I need to remove the steering wheel first (no airbag)? :confused:

------------------
Jim Loseke
1980 450Sl

Yes. The steering wheel has to come off to get the cluster out. Remove the small plastic "Star" in the center of the horn pad with a small screwdriver (pry it out) to get to the nut. You can also get at the cable from under the dash after you remove the lower panel.
Regards,
Randy D.

------------------
W.R.Durrance
ASE Master Tech
Mercedes Tech 21 Years
68 250SE
68 SAAB 96 Ice Racer
69 300SEL 6.3
70 300SEL 3.5
81 300TDT
W.R.Durrance Engineering