Neutral Saftey Switch Adjustment

[TuckerD]

Hi all,
Well last Friday, I replaced my neutral saftey switch on my 1992 300E. And after replacing the switch all was well. I new that this part was probably going bad for a couple of months, because when the car did have problems starting I was always able to start it by shifting to neutral and starting or just by taking it out of park and putting it back into park and would start. But it finally just completely went bad and the jimmy starting method didn't work anymore. So as I mentioned after puting in the new switch all was well the car started just the way it should. I also replaced the linkage bushings while I was under there, because I figured they would be pretty worn as well, and there were. So this is the problem, one week to the day it won't start. My suspicion is the the switch isn't properly adjusted, does any one have any sugestions as to what the proper way is to adjust the switch. Thanks for your help in advance!

Tucker