Torque Settings. 280sel 4.5

[p.smitty]

I had to replace the "heater tube" that runs underneath the intake manifold. New tube is in, intake manifold is back in place, but even though I have the blue shop manual, I can't find the torque sequence, nor torque values. Any ideas?

Pat
510-579-1887

[Wayne Robson]

Hi Torque,inlet manifold is 22 to 25 ft pd ,sequence, cris, cross, from center
out.regards.

[p.smitty]

Thanks Wayne, Worked great! No leaks!

Pat