Has anyone done their own dash veneering?
 

I'm looking at trying my hand at this while it's too hot to be working in the hobby shop. If you've done it, what glue did you use?

Thanks

I used 2 part epoxy, I think LePage sells them in 2 part tube. Worked great. Even clamping is key though.

I considered it and may still consider it. It takes some investment in tools but probably worth it. Here is a site with some good info. I'm not fond of the over restored/plastic look that everyone drools over provided by the well known restorers. The wood did not look like that out of the factory.
https://www.joewoodworker.com/

Thank you!