Quote:
|
Originally Posted by LarryBible
The procedure, other than Bills container in place of the windshield washer reservoir part, is the same for ANY vehicle MB or otherwise. Just remove the return line and place it in a container.
The return line deals with very low pressure as compared to the pressure line so it is usually easy to identify. USUALLY it is a simple hose with clamps rather than a hose with fittings, but not always. It also USUALLY is the highest hose on the pump.
Good luck,
|
Yes, it is low pressure but when you're turning the wheel back and forth it does gush out rather quickly. You'll get the wheel fully turned one way and then have to shut it off so you can refill. Watch out for the back splash from the pump resorvoir[sp.?]when you shut it off.
W123's have hose clamps on the low side. Don't know about the rest like the '02 BMW. Newest car I own is a '93.
Cheers,
Bill