|
do you know anyone with a left hand drill bit set....that may be enough to do it...unfortunately I have ZERO devices for broken bolt extractions as I have never needed them thus far....I tend to buy what I need when I need it...did it get this cross threaded..or by chance was any of the bolts longer than the rest and you got a long bolt in a shallow hole? Was you local to me? I forget. Someone here will have a parts engine you can score a bolt off of....my spare engine is a strong runner so am not stripping parts from it at all. Get that part off the car and see if there is anything above the surface of the head to get a bite on....you may get lucky, many bolts shear off right at the end of the threads at the begining of the shoulder.
__________________
Proud owner of ....
1971 280SE W108
1979 300SD W116
1983 300D W123
1975 Ironhead Sportster chopper
1987 GMC 3/4 ton 4X4 Diesel
1989 Honda Civic (Heavily modified)
---------------------
Section 609 MVAC Certified
---------------------
"He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche
|