only i fit gets broken...I've never worn out a Craftsmant tool....but I have brokken a few...and some of mine I have used for 30 years...
like a 1/2" breaker bar I had a 3' pipe on jumping on it trying to break loose an axel nut....POW!.....tried the 1'2 regualr ratchet same way......POW! broke that.........went to sears adn they chearfully replaced them........after heating it up cherry red then trying agin it broke loose....
1/4 is the smallest one....suitible for small stuff only....3/8" you can break if you lean into it , adn 1/2" is durable for automotive work in general....
You really need all three....get the set sears has on sale for just shy of $200 you won't regret it....its a quality set of tools, and having th eright tools and good ones makes any job far less agrivating.
__________________
Proud owner of ....
1971 280SE W108
1979 300SD W116
1983 300D W123
1975 Ironhead Sportster chopper
1987 GMC 3/4 ton 4X4 Diesel
1989 Honda Civic (Heavily modified)
---------------------
Section 609 MVAC Certified
---------------------
"He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche
Last edited by boneheaddoctor; 12-02-2005 at 03:01 PM.
|