Quote:
|
Originally Posted by braverichard
I just don't know how to perform that "complete" cleanup. I still have two lines from the black box running to what seems like the modulator on the injection pump.
|
No sweat.
Each of those two lines from the black box runs to a "T", correct?
Take out each of those two lines and throw them away.
You now have (2) "T's" with an open hole on one side.
Remove one of the "T's" completely and throw it away.
Now, you have two hard plastic lines that had gone into each side of the "T".
Conncect the two hard plastic lines with a short section of vacuum hose.
Remove second "T", throw it away, and repeat the connection with the short piece of vacuum hose.
You are done.
