OK, did some checking today. Can someone tell me how many electrical switches/senders belong on the Receiver dryer? The wires I spoke of earlier, are in fact the two that plug into the switch on the receiver dryer. Light brown or tan wire( I assume in a ground, and a light brown or tan wire with a light blue chaser. Both of these wires have the female mate to the aux fan switch pigtail, if I had a switch. There is already a switch on the receiver/ dryer, that is not configured properly, to mate with an aux fan switch pigtail. One of the fitting bosses on the receiver/dryer has a port plugged. Maybe this is where the aux fan switch belongs? The receiver/dryer is brand new, so anything is possible. I pulled the fuse that was jumping, and that killed the fan.