Quote:
|
Originally Posted by 95 S320 LWB
Does it matter what sequence the resistors are wired? And what color wire they connect to?
I am assuming R15 in the diagram is part number 0001583745? (and that R15/1 is part number 0001583945)
Do you know which color wire that should be connected to R15 and to R15/1?
I just want to make sure I do this right the first time...THANKS!
|
As MB Doc said, it's a series circuit. To see this 'visually', look at Menu#18 to the sketch just above the "blue" table (Aux Fans Activation).
The first sketch shows a 'three-speed' system; if you look carefully you'll see an 'extra' wire that goes to R15 resistor. There's no "jumper" bar.
The second sketch shows the 'two-speed' system. Note the jumper bar and only two wires. . . a 'series' circuit.
The resistors are switched in (shown in the schematic) with the Aux Fans according to the following;
"no-resistors-in-series" = High speed
"one-resistor-in-series" = Medium speed
"two-resistors-in-series" = Low speed