View Single Post
Old 09-01-2001, 12:24 PM
engatwork's Avatar
engatwork engatwork is offline
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,878
You will need to make sure too that the last 1" or so of the cable you use to rod out the passage is flexible. The first time I did it the last inch or so of the cable was "fixed" and when I got to the last 90 bend it would not negotiate this bend. I thought I was "bottoming" out but after putting everything back together the light came on again shortly thereafter with the same egr code. I modified the end of the cable, re-rodded and now everything is fine.
Reply With Quote