Quote:
Originally Posted by TimGraham
...............................................
1. When I begin to accelerate, it takes about 4 seconds for the engine to actually respond to the pedal. The car will roll forward, as most cars do when they are in drive, but the engine will not accelerate until about 4 seconds after I press the pedal.
Thanks for any help anyone could provide.
|
You will need to adjust the ALDA on top of the injection pump.
This gives the needed increase in acceleration fueling to build torque and then boost pressure.
A very, very rare problem is the torque convertor with a siezed stator.....this causes no torque multiplication at low rpm's. (A feeling like pulling away in 3rd gear at very low rpm's.)
.