Gilly,
I removed the under dash panel today and checked things out. I also have printed out the WIS docs.
Yes, the whole assy. is loose and wobbles where it goes into the steering column. Should I just tighten up the bolt?

I will jack the car up tomorrow and check battery voltage to the solenoid wire from the ign. switch.

Can you explain why the instructions say to remove the escutchon around the key switch first? Can it just be taken off from the bottom end or does the turning it out unscrew it from the elect. switch? It started to turn out with my fingers and then stopped. When I got under the dash and looked, an electrical wire was getting tight from the turning of the assy. I guess it is the transponder coil wire.

Many Thanks,
MB Paba