|
My 93 190E 2.6 is lowered about 1.5" from Eibach springs up front, and another 20mm from switching to the smallest perch/pad/shim height.
I have fenders rolled, and use 215/50/16 on 16x7.5s. No rubbing at all, even on extremely high dips at triple digit speeds, and I never leave the ground either :p
I tried 18x8s with 225/35/18, and they fit just fine, except the rub on the inside corner where the corner of the sheet metal meets the fender, and i just cut a little bit of the off. Works great!
Good Luck.
__________________
Chirag (Charlie) Patel
--------------------------------------------
- 03 Mercedes S600 Sport TTV12
- 97 Acura NSX-T
- 99 BMW E36 M3 w/500+ HP
- 04 Lexus RX330
- 04 Dodge Dakota Quad 4x4 V8
4 Sale:
- 99 BMW M3 E36 Coup with Dinan SC, Upgraded to an RMS Stage 3 with Aftercooler, 12psi, and 500+hp @ flywheel.
|