Quote:
Originally Posted by JeffreyP
Not another ATF thread, I just want to see if this would work for measuring ATF temperature without spending money on the infrared thermometer or the like.
According to the ATF DIY article and recommendations, the ATF level measurement (in my case a 98-E320) must be done at 80Celsius. Here are my questions:
1. Doesn't the transmission line go through the radiator for cooling? If yes, then
2. should the ATF be at the same temperature as the engine coolant? So measure the coolant temp should be quite simple
I believe there is also a procedure using the "REST BUTTON" to see the coolant temperature? Does any one have the link?
Please let me know what your thought on this - Gilly, MBDoc and other informed mechanics?
Regards,
JeffreyP
|
Jeff, there are two reference points on the dipstick tool: 25C and 80C. It's much easier to gage the level at the lower temp. It can be challenging to get the temp up to 80C.
__________________
1998 W210 diesel (wiped out by a texter)
Baum spring compressor "for rent"
Last edited by uberwgn; 10-12-2006 at 07:45 PM.
|