View Single Post
Old 10-23-2001, 09:17 AM
jsmith's Avatar
jsmith jsmith is offline
Join Date: Aug 2001
Location: At Sea
Posts: 1,729
can someone verify where the adjustment is made? i thought it was where the cable housing is attached. there is a 13mm nut that you can turn to move the cable housing in or out. i thought that moving it out would shorten the cable and make the shifts later so i gave it a half a turn out. i observed the opposite effect- now the tranny won't downshift at all and shifted 200 rpm earlier
1993 300e-2.8
- gone now <sigh>
"Do not adjust your mind, it's reality that's malfunctioning"
Reply With Quote