Quote:
Originally Posted by JimmyL
Master cyl. cap $6.97  (can you believe that? Pep Boys was $5.99) |
So after much procrastination, finally decided to gather the parts and build this. The problem I ran into is this:
Local Autozone needs to special order the correct GM cap (according to the BMW site, 42035 1987-1990 GM). I'm assuming this is the correct cap unless otherwise noted.
I also have the Watts 1/4 ID Clear Vinyl tubing from Lowes for less than $2. On the label it clearly states "Use for: Low Pressure", Since JimmyL uses it, I'm assuming its fine.
I don't have any automotive grade silicone, but I do have some for aquarium use... will it work?
Hoping to bleed this weekend.