Thread: 3.5 bent rod?
View Single Post
  #176  
Old 11-12-2006, 02:44 PM
Brian Carlton Brian Carlton is offline
Banned
 
Join Date: May 2002
Location: Blue Point, NY
Posts: 25,396
Quote:
Originally Posted by BenzDiesel View Post
My car in this thread is not an 86 603. And, I don't buy that belief that "no oil consumption when the level on the dip stick is low, but if filled to the proper levels, then the car will consume oil". The engine is going to consume oil or it isn't,
Sorry to tell you that your observation is not correct for the majority of the members on the forum. With the oil right at the full mark, the engine will consume it faster than if it's at the low mark. I never said that the consumption ceases. It simply is reduced. The fact that you've got 603.970 engine is a moot point. If it's common to the 603 series engines, it's going to manifest itself in that engine as well.

Quote:
Originally Posted by BenzDiesel View Post
And, I would never ask you a question if I already knew the answer to the question, just to be asking you a question; and then jump on you if I did't like your answer to the question that you already knew the answer to.
If I knew why the oil light never illuminated, even though you added 4 quarts of oil, then I wouldn't have asked the question.

Quote:
Originally Posted by BenzDiesel View Post

I have put in four quarts TOTAL and have driven this car 850 miles. So that means that if the yellow light will come on when I'm two quarts low, then that would make me have added oil ONCE, right?
If you added oil at the point where the light came on, and you added two quarts to bring it up to the full mark, and only added oil once, then how do you get to the total of four quarts?

Seems like your data is flawed or your math skills are weak.
Reply With Quote