Quote:
Originally Posted by Brian Carlton
You've first got to remove the turn signal assembly via the nylon knurled knob.
|
That didn't seem to be in the way. ?
Quote:
Originally Posted by Brian Carlton
Then, the bezel around the headlight comes off via four screws that are almost impossible to see.......two above and two below the headlight.........from the front.
|
So, I get to the screws from the back? And it comes off the front? Or do I in fact have to do what the illustration shows on the headlamp box and take a screwdriver and pry off the bezel and then unscrew the frame holding in the light? (Which looks monumentally idiotic as I'd be using the surrounding fragile plastic as a fulcrum with a blunt instrument.)
I first was reading the DIY pages and saw the Euro light replacement bit...but, for a whole lot of reasons I have to stick with this for a while.
edited cause I saw this:
Quote:
Originally Posted by Craig
Use the three white knobs to remove the plastic "covers," then you can see the screws that hold the chrome rings around the headlights. Remove the chrome rings to get the headlights out.
|
The thing is, I took off the 3 white nuts and couldn't get the plastic back off. Tricks?