List your Bosch injection pump and hose part numbers here. That way all you have to do is get familiar with your local Bosch Distributor for the parts.

The first pic shows the o-rings that go on the hard hoses with the clip fittings on the ends. The black o-ring is one that came off the car and the blue ones are the new ones.

The second shows the part number for the injection pump distribution nozzle. These have to be torqued to 35 Nm based on the manual that MBDOC posted a pic of. The last three numbers are the ones stamped on your nozzle.

If anyone has the p/n for the white place u-shaped clips that hold these lines on it would be appreciated.

Edited to correct the torque requiremnet.

Attached Thumbnails

   

__________________
Jim