"EHA idle -.00 to +.01" Wow, great right meter setting

"EHA 2000 -.01 to +.08" Again just about right

"X11#3 10MA setting .2 to.5 slow rise and fall" OOPS. Should be volts, about 7.0Volts

"X11#3 10MA setting .02 to.06 very slow rise and fall with a very long pause between movement." I'm surprised the meter in MA didn't short the signal and hurt something, Must be a well engineered test point. Someone must have told the designer a guy named JNT would hook a current meter up to measure volts.
"Thats it how did I do?" 50/50?

Do it again measuring the voltage at pin 3, Idle and 2000 for the 10% difference. Hopefully its close to 7V. At least, adjust it to get the 10%. Lets look around and ge the voltage right. The formula I saw was (1- (pin 3 / pin 4). ie., 7/13.8 = .5. 6/13.8=.43 1-.43=.56