Well I am not sure if I am done with the EHA but THE numbers are looking good I may still be a little high by the % figures,NOW on to the potentiometer
the ohm reading was taken this morning,and at RX1K I have p 1&2=3.6 to 9 as you push the flap down and it is not a smooth flow p2&3 8 to 10 then as the flap is full open it drops to 5 ohm pin 1&3 is at 4.5 with no change.
P 1&2 3.6 to 9
p 2&3 8 to 10 full open 5
p1&3 4.5 no change jnt