View Single Post
  #1  
Old 01-28-2007, 01:06 PM
Scott98's Avatar
Scott98 Scott98 is offline
Registered User
 
Join Date: Aug 2003
Location: Weston, FL
Posts: 1,254
How to install camshaft woodruff (offset) key - pics

I decided to correct my timing chain stretch by installing an offset or woodruff key. The FSM on this is pretty straight forward so I just included some pics of how the woodruff key looks in place. The pics aren't as clear as I would have liked but I hope this helps someone.

Pic 1 is the old woodruff key still in place. It's just above the timing mark. Pic 2 is with the key removed. Pic 3 is a picture of the old key. I had to use vice grips to yank it out. Pic 4 is the new key and you can see how it is offset via a flange.

My timing was 4 degrees off at the crank. Now it is spot on. I swear the car is a little faster. Next job - set injection pump timing.


Scott
Attached Thumbnails
How to install camshaft woodruff (offset) key - pics-one.jpg   How to install camshaft woodruff (offset) key - pics-two.jpg   How to install camshaft woodruff (offset) key - pics-three.jpg   How to install camshaft woodruff (offset) key - pics-four.jpg  
__________________
Scott
1982 Mercedes 240D, 4 speed, 275,000
1988 Porsche 944 Turbo S (70,000)
1987 Porsche 911 Coupe 109,000 (sold)
1998 Mercedes E300 TurboDiesel 147,000 (sold)
1985 Mercedes 300D 227,000 (totaled by inattentive driver with no insurance!)
1997 Mercedes E300 Diesel 236,000 (sold)
1995 Ducati 900SS (sold)
1987 VW Jetta GLI 157,000 (sold)
1986 Camaro 125,000 (sold - P.O.S.)
1977 Corvette L82 125,000 (sold)
1965 Pontiac GTO 15,000 restored (sold)
Reply With Quote