View Single Post
Old 11-21-2001, 12:08 PM
stevebfl stevebfl is offline
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
Modulator pressure is fixed. The test spec is 6.8bar at stall speed full throttle vehicle stationary.

Working pressure is 13.6bar under above conditions in "L" pos. 8.9bar in position "D", and 18 and above in reverse.

Stall speed should be 1600-1700rpm.

Kickdown shifts 1-2-1 Pos "D" 33kph/21kph
2-3-2 50kph/45kph
4-4-3 97kph/84kph

About the only adjustment on that trans is the throttle link to the trans. It has a compound control of shift strength as the mod is not changing. If the shifts are too soft make it shift later and vise versa.
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote