Dennis_300E: I retrieved the old parts and the bracket is a fairly substantial metal piece (about 8" by 4"). The MB number stamped on the part is 104 205 0405. It has a bearing hole about the size of a silver dollar--there is nothing left of the bearing except the race. It does look as though the bearing could be replaced--but not sure if you can buy just the bearing. My bill shows that I was charged for a "Fan clutch bearing bracket, #104 200 1328 with a price of $165. Thus, in the worst case of preventive maintenance, you could change the entire bracket with the bearing already pressed in it. It may even be available aftermarket for less. Good luck. jcd