Getting around to repairing the little stuff on recent purchase ... driver side visor cover was popping off. The right side pin that holds it into the mirror assembly is broken off (I gotta say the pin material looks thin and prone to this - unacceptable in this kind of car, but ...).

There are two metal friction clips, left and right, and a slot for what I guess is an alignment tab to keep the middle of the cover from popping out.

What I can't tell if where the switch for the light is - does the tab push a switch inside or is the switch somehow connected to either the right or left side friction clips?

I carefully flexed the edges of the mirror assembly, but was not apparent it would either pop out of release easily ... anyone done this dance before? Replacement cover or mirror assembly available from aftermarket house, part numbers for the cover or mirror assembly?

Thanks in advance for any advice!

__________________
George Stephenson
1991 350 SDL (200K and she ain't bent, yet)
former 2002 E320 4Matic Wagon - good car
former 1985 300 CD - great car
former 1981 300 TD - good car
former 1972 280 SEL - not so good car
a couple of those diesel Rabbits ...40-45 mpg