I did this job with a friend last week and taking our time installing and bleeding the brakes... it took just under two hours....
Bench bled the MC, and everything was just as smooth as can be. I did make a momentary mistake eyeballing the brake fluid resevoir (didn't look at both sides of the split resevoir until one side was near empty...)
I am only a beginner mechanic, and the job was easy, saved about $100 in labor...Thanks to all that advised...
Quote:
Originally Posted by spugeddy
I need to replace my brake master cylinder on my 85 300cd. Any advice.
I have found some online for around $85 plus shipping. Anyone done this job before.
any info would be greatly appreciated.
BTW Pedal travels to floor 3x so far. and will recharge with a few quick pumps.
|