It is a "lift pump" and is also on the side of the IP to the rear of the shut off valve. About the same size as the shut off valve.
Unless your shut off valve is malfunctioning you probably only need a new o-ring....it is 2.5 x 12mm ID. Easy to replace if you remove the wind sheild washer bottle. Two torx cap bolts. Leave fuel lines connected to valve; no need to remove them.
__________________
Terry Allison
N. Calif. & Boca Chica, Panama
09' E320 Bluetec 77k (USA)
09' Hyundai Santa Fe Diesel 48k (S.A.)
|