Yes remove the 3 allen bolts & the nut. The nut holds the governor in place so look at the "slot" on the stud that the nut screws onto & make sure that after the repair that the slot is still in the same position. IT's a good idea to replace the nut as there is a molded seal on this nut.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator