Quote:
Originally Posted by usman21
hi, arthur
12v at pin 4 rd/wht at koeo right? or is it constant and pin #9 at the module right or at the connector
on last thing do you have a picture of the module? where is located under the dash drive side or how does it look.
|
No pics .. but I do have a schematic of the DM module circuit..It may be a lot easier to get that to you than for me to start telling you which pins to test and trace..a diagram is so much easier and it has all the terminal # and wire color codes to follow.
That would require an email addy so I could jpg it to an addy, but as you know from your first PM, I do not do private diagnostics anymore [ just had to stop b/c of the traffic] , so any post have to be done here..