OK Tex, here are some pics. I will still look for the pic of the wiper motor assembly.
This pic (arrows) show the various screws that you need to remove. From left to right, the first arrow shows what the wiper motor shaft looks like when you remove the wiper arm; next to it is the connection to the fluid hose that goes into the wiper arm; next over (pointing down) you will find one screw that needs to be remove; the other two arrows (pointing up and down) show two more screws that also need to removed; finally the last arrow points to the clip, behind the turn indicator light assembly that you need to squeeze in order to get the turn indicator assembly out.
You need to remove this screw (right side). If your car has the dual aux. fans, this will be a little bit tricky.
Same screw as above, but on the left side. You will need to remove the air snorkel going from the air cleaner housing to the left side of the radiator.
You need to remove the top, black plastic spacer (for lack of a better term). then you also need to remove the screw at the end of the trim panel. These screws are easily visible.
I would suggest that you buy from the dealer (or from PerformanceParts) two mounting kits. It will include all the screws, clips and the black "spacers" that you will need. You can reuse the ones you already have, but you'd probably want new parts. The kits are cheap.
I hope this helps. I will post the otehr pics when I find them. I will also post pics of what you need to do to "re-wire" the elecrical plugs.
Good luck!