Sorry for the double post..I forgot to put in "removing the valve body"......


I have found lots of good info concerning the B2 piston. It seems that the B2 is associated with no forward gears but the reverse gear is working.

That both forward and reverse failed at the same time with no hint(that I was aware of!) seems weird. What, am I just lucky!

From the Alldata info it appears the B2 piston would not be to hard to replace.
The reverse gear problem seems to be more complicated to solve.

I am thinking about draining the fluid to see if anything shows up in the pan.
then removing the valve body and inspecting the springs etc.. It is abit of a desperation move but since I will be there anyway while changing the fluid I figure I may as well take a look.
I will replace the B2 piston once I get the bottom all buttoned up.


If nothing else maybe this will get me the forward gears and I can get it somewhere for further attention.

Sooooo folks, am I just pissin in the wind with this thought?

Thanks.
Take Care