Fine tuning is by an eccentric bolt connecting the rod to the master cylinder to the pedal lever. It takes two wrenches. Loosten one end and turn the other and you will find the pedal moving in and out. Put it where you want it and tighten the locking nut.

Good luck.

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.