Quote:
Originally Posted by tgingrich
Working on my engine swap project into the SD, I refer to the Haynes manual for engine mount bolt to body torque because it's handy - the FSM cd is in the computer upstairs and I'm covered in grease in the garage.
96ft lbs.
|
I think that Haynes divided when the should have multiplied when converting Nm to ft/lbs. The 617.95 manual specifies 70 Nm for that bolt, which converts to approx. 52 ft/lbs. If you do the conversion backwards, what do you get? 96 ft/lbs!!!
The bolts are not brass. The corrosion-preventing cadmium plating just makes them look like they are.