I would check for stretch the eyeball method first and dig in deeper if not happy with those results. I followed the often mentioned procedure of lining up the camshaft and crank marks on mine at 220k, original chain and they lined up to Zero eyeball stretch, if I had more than 2 deg I would have gone into it per the FSM.

Just make sure to do it multiple times and average your readings, I did mine 5 times over each time showing zero so I'm not concerned. Eyeballing it should get you to within 2 degrees of precision. Since the tolerance limit is 4 degrees I'd recommend checking it with a dial indicator if eyeballing it gives you 2 degrees or more of stretch.

__________________
Stable Mates:
1987 300TD 310K mi (Hans)
2008 Jeep Grand Cherokee OM642 165k mi (Benzrokee)