John,

That first picture is with hood latched and the grill removed. I used sockets on an extension to check the tight spots. This picture is the tightest point and there is about an inch .960 something. A bit more than your pack.

The 126 cars don't have a subframe like the 107, two rails and a crossmember with the aprons welded to the rails. I am using 126 chassis mounts, the crossmember in the 126 would require MAJOR work to fit the M120 mounts. The left engine mount will require a bit of work and I may end up making new right mounts from scratch.

The race is on; a bit of friendly compitition will get us both more focused on finishing. I have had my share of curve balls the last week or two that kept me busy.

Steve