Sorry AJ,
to the best of my knowledg, from your test results the relay portion of the circuit in the MAS unit is not working.
Replacing the mas unit should fix the problem. I personally would try to use a known good one for confrimation. Also I would carefully open the unit and check it with a 5X magnifying glass, look for cracks in the solder joints, connections and pin connections. It may be repairable.
Please don't waste time now with other components that I suggested, I though you were having hard starting even with the pins jumpered.
Acky
Last edited by Uncle Acky; 11-16-2007 at 09:26 AM.
|