Quote:
Originally Posted by rjfjr1
yep, a little fishing around and I found it..jumped and the fans went on, as far as I can tell, not as loud as when engine is running, so perhaps this is the low setting...
|
Very Good.
That would be LOW fan and would be correct. I just had to know for sure that we had the correct circuit and that tells us we are OK.
So, we are back to the high fan circuit and from what you tell me , it looks like you have a bad or inaccurate blu 2 wire sesnor OR a poor connection at the terminals.
Do this test when you get back..
Key ON , car engine temp cool.......remove two wire sensor connector and see if high fan comes On by default...