Aloha,

I am sure there is a quick answer to this so thank you in advance. I looked and couldn't find anything that covers replacement of the center link.

With a tie rod I could bang on the bolt head after the nut was removed and finally get the old rod decompressed and off...

With the center link, however, it is seemingly impossible to do the same thing because the bolts stick up and I can't get any leverage from the top. So the question is how do I get the bolts to loosen up?

__________________
Thanks,
Will

1985 300D- 222k- (bad transmission)
1980 300D- (parts car)
1982 300SD- 242k